11
3. Before You Start Testing
Samples
HbA1c
SD A1cCare™ analyzer for HbA1c testing is designed for monitoring fresh capillary or
venous whole blood. Do not use the frozen blood or the articial materials not allowed.
Safety Information
There is a potential risk of infection. We recommend that healthcare professionals using
SD A1cCare™ analyzer to perform measurements for more than one patient use gloves and
follow all other locally applicable health and safety regulations.
Operating conditions
To ensure proper function of SD A1cCare™ analyzer, observe the following guidelines:
t SD A1cCare™ analyzer is only for
in-vitro
diagnostic use.
t Operate the analyzer only within the acceptable temperature range. This temperature
range is test-dependent at 15-32°C (59-89°F).
t In order to perform a measurement, place the analyzer on a level surface or hold it in
your hand.
t Strong electromagnetic elds may impair the function of the analyzer. Do not use the
analyzer close to sources of strong electromagnetic radiation.
t The analyzer's air vents must be free for air (Do not cover the air vents).
t If the analyzer cause a sudden malfunction, unplug the AC adapter from the outlet.
Carefully read and follow the instructions in the User Instruction Guide and Package Insert
for the test kits and control solutions. It is very important to follow the instructions in
order to prevent an incorrect result or improper treatment.
To Next Page
Loading...