49
CHAPTER 7. Performing Check Strip Test
When should I check my analyzer with SD HbA1c Check Strip
When you want to check the performance of the analyzer.
t Before using your analyzer for the rst time.
t Whenever your result does not agree with the level you feel.
t If you have repeated a test and the blood glucose result is still lower or higher than
expected
.
1. How to Use SD HbA1c Check Strip
Before you insert SD HbA1c Check Strip to the analyzer, you have to press the Enter and
Start button at the same time for 3 seconds in blood wait state.
Then 'CHE(Check)' will be displayed, then you can insert the check strip to the analyzer.
SD HbA1c check strip test will take 15 seconds.
If the analyzer displays 'EEE', the analyzer has a problem. Contact SD Biosensor, Inc.
at +82-31-300-0400, sales@sdbiosensor.com.
Check Strip test does not replace Control Solution test.
To Next Page