To Next PageTo Next PageWhat to do if the control result is outside the appropriate acceptable range for BioSensory SD A1cCare Measuring Instruments?
If the control result for your BioSensory Measuring Instruments falls outside the acceptable range, repeat the test. Should you obtain the same result, refrain from using the analyzer and test kit until the issue is resolved. If difficulties persist, contact SD Biosensor, Inc. at +82-31-300-0400.
How to properly insert test kit into BioSensory SD A1cCare Measuring Instruments?
To ensure proper functioning of your BioSensory Measuring Instruments, verify that the test kit is fully inserted into the designated slot until it can go no further.
What to do if I didn't follow the procedure correctly using BioSensory SD A1cCare Measuring Instruments?
To resolve this issue with your BioSensory Measuring Instruments, carefully review the instruction manual and retest.
How to enable control solution mode on BioSensory SD A1cCare?
If you did not perform the test in control solution mode and did not see the “control solution container icon” on the screen with the result, repeat the test. Insert a test kit, then press the ? button for 3 seconds to display the control solution container icon on your BioSensory Measuring Instruments.
What to do if test kits were not stored correctly for BioSensory SD A1cCare Measuring Instruments?
If the test kits were not stored correctly, retest with a new test kits for your BioSensory Measuring Instruments.
General| Brand | BioSensory |
|---|---|
| Model | SD A1cCare |
| Category | Measuring Instruments |
| Language | English |
Steps for first-time use: insert batteries/AC, set analyzer, insert code chip.
Lists required items and precautions for measurement preparation.
Steps for switching on the analyzer and checking displays before measurement.
Detailed steps for performing HbA1c test using Type A kit.
Detailed steps for performing HbA1c test using Type B kit.
How to perform a control check for HbA1c, and when to use control solutions.
A table listing common issues and their solutions for control solution tests.
Instructions for inserting and using the SD HbA1c Check Strip.
Guidelines for cleaning the analyzer to maintain performance.
Advice on general maintenance, testing procedures, and safe transportation.
