EasyManua.ls Logo

BioSensory SD A1cCare - CHAPTER 11. Product Technical Information; Analyzer Specifications; Test kit for HbA1 c

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
CHAPTER 11. Product Technical Information
1. Analyzer Specifications
ON/OFF Source Four batteries (1.5 V, AA) or AC adapter(5V/2A)
Battery Life Around 200 tests
Display -$%$VTUPNJ[FE
Controls 5 Buttons(SET/PRT, Enter, Arrow:
ೞ
/
೛
, Start/Eject)
Memory 1,000
Automatic Shutoff
t 1 minute after last user action without inserting a test panel into the analyzer
t 5 minutes after last user action when inserting a test panel into the analyzer
2. Test kit for HbA1c
Result Range 4.0~ 15.0%
Sample Fresh capillary or venous whole blood
Sample Size V-
Test Time 3minutes
Test kit Storage Temperature 1~30°C (34 to 86°F)
3. Electromagnetic Compatibility
This analyzer meets the electromagnetic immunity requirements. The chosen basis for
electrostatic discharge immunity testing was basic standard IEC 61000-4-2. In addition, it
meets the electro –magnetic emissions requirements as per EN 61326. Its electromagnetic
emission is thus low. Interference from other electrically driven equipment is not to be
anticipated.