Biostar B350ET2 - Vivid LED DJ

Chapter 3: UEFI BIOS & Soware | 27
B350ET2
Vivid LED DJ
Vivid LED DJ can adjust your color scheme of on-board LEDs and RGB LED Device.
1. Normal Mode: It balances energy consumpon and system performance.
2. Default: All the seng are back to default.
3. ECO Mode: It saves energy by slightly reducing system performance.
4. Sport Mode: It provides the highest level of system performance.

»
ECO&SportonboardbuonsandLEDlightswillbeavailablewhenrunningRACINGGTprogramin
Windowsenvironment.

»
ThecolorschemesofNormal,ECO&Sportmodecanbeadjustedbybelowsengitems.
5. LED Type: Select the LED lighng blocks.
• ALL : All LED illuminaons.
• SYSTEM : System LED illuminaon. (on board LED)
• HEADER 1 : The hearder 1 LED illuminaon. (RGB LED Device)
• HEADER 2 : The hearder 2 LED illuminaon. (RGB LED Device)

»
IfyouselecttwoormoreLEDtypes,youcanonlyselectonecolorandonesparklingmode.
6. Auto: LEDs will automacally change the color.
7. Permanent: LEDs are constantly lit.
8. Breath: LEDs gradually ash on and o.
9. Color Palee: Allows to you choose specic color of the LEDs.
10. Shine & Music: LEDs will ash according the music played on your system.

»
PleasemakesureyourspeakerorearphoneisproperlyconnectedtoaudiojackbeforeusingRACING
GTprogram.
11. Shine: LEDs ash at a specic frequency.
12. Light/Dark: Allows you to adjust the LED brightness.