30 | Chapter 3: UEFI BIOS & Soware
SmartEAR
Smart EAR allows you to control system volume and adjust impedance seng (Low/High
Gain) to opmize your headphone performance. You can easily enjoy high-quality and
awesome sound.
Requirements:
1. A chassis with front audio output jacks
2. An earphone or a headphone
3. Windows 7 (32/64bit)/ 8.1(64bit)/ 10(64bit) operaon system
Installaon Guide:
1. Make sure the front audio cable of the chassis connected to the front audio header of the
motherboard properly.
2. Install the RACING GT EVO program from the driver DVD.
3. Connect the earphone or headphone to the front audio jack of the chassis or audio lineout
port of rear I/Os.
»
»
If you want to use an AC’97 front audio output cable, please disable the “Front Panel Jack
Detecon” seng. This seng can be found via O.S. Audio Ulity.
1. Volume Control Knob: The volume can be nely adjusted by turning the knob either
clockwise or an-clockwise to increase or decrease system volume accordingly.
2. Mute: To disable system sound.
3. High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set
to high for high impedance headphone.
To Next Page
Loading...
Need help?
General
