Biostar B660MX-E PRO - 3.3 Software; BIOScreen Utility

Chapter 2: Hardware installaon | 27
B660MX-E PRO I B660MH-E PRO
3.3 Software
Installing Soware
1. Insert the Setup DVD to the opcal drive. The driver installaon program would appear if
the Auto-run funcon has been enabled.
2. Select Soware Installaon, and then click on the respecve soware tle.
3. Follow the on-screen instrucons to complete the installaon.
Launching Soware
Aer the installaon process is completed, you will see the soware icon showing on the
desktop. Double-click the icon to launch it.
Note
»
»
All the informaon and content about following soware are subject to be changed without noce.
For beer performance, the soware is being connuously updated.
»
»
The informaon and pictures described below are for your reference only. The actual informaon
and sengs on board may be slightly dierent from this manual.
BIOScreen Ulity
This ulity allows you to personalize your boot logo easily. You can choose BMP as your boot
logo so as to customize your computer.
Please follow the step-by-step instrucons below to update boot logo:
• Load Image: Choose the picture as the boot logo.
• Transform: Transform the picture for BIOS and preview the result.
• Update Bios: Write the picture to BIOS Memory to complete the update.
28 / 147