Biostar B660MX-E PRO - Page 30

Chapter 2: Hardware installaon | 29
B660MX-E PRO I B660MH-E PRO
7. Auto: LEDs will Automacally change the Color Palee and LED Brightness.
»
»
If you select Auto mode, the Color Pallee and LED Brightness Bar will disabled.
8. LED SPARKLE: Allows to you choose sparkle of the LEDs.
• Permanent: LEDs are constantly lit.
• Shine: LEDs ash at a specic frequency.
• Breath: LEDs gradually ash on and o.
• Shine & Music: LEDs will ash according the music played on your system.
»
»
Please make sure your speaker or earphone is properly connected to audio jack before using
RACING GT EVO program.
• Meteor: LEDs slide at a specic frequency.
• Wave: LEDs are presented in a water wave rhythm.
• Starry sky: LEDs icker at a specic rhythm.
• Lightning: LEDs ash and slide at a specic frequency.
• Rainbow: LEDs lights to dazzling colorful rhythm.
• Aurora: LEDs shows so light and ickers lightly.
9. High/Low Speed Switch: Allows you to control the icker speed.
Note
»
»
With VIVID LED DJ users can control the four LED light zones independently with dierent ashing
modes (LED SPARKLE).
30 / 147