Biostar BIB75-M2T - Acpi Settings

BIB75-M2T
23
ACPI Settings
ACPI Sleep State
This item selects the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
Options: S1 (CPU Stop Clock) (Default) / Suspend Disabled / S3 (Suspend
to RAM)
Restore AC Power Loss
Specify what state to go to when power is re-applied after a power failure.
Options: Power Off (Default) / Power On / Last State
Lock Legacy Resources
This item enables or disables lock of legacy resources.
Options: Disabled (Default) / Enabled
PME Wake up from S5
This item enables the system to wake from S5 using PEM event.
Options: Disabled (Default) / Enabled