Biostar BIB75-M2T - Boot Menu; Bootup Numlock State; Option Rom Messages; Setup Prompt Timeout

BIB75-M2T
47
3.4 BOOT MENU
This menu allows you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options: 2 (Default)
Bootup NumLock State
This item selects the keyboard NumLock state.
Options: On (Default) / Off
Full Screen LOGO Display
This item allows you to enable/disable Full Screen LOGO Show function.
Options: Enabled (Default) / Disabled
GateA20 Active
Upon Request – GA20 can be disabled using BIOS services. Always – do not
allow disabling GA20; this option is useful when any RT code is executed above
1MB
Options: Upon Request (Default) / Always
Option ROM Messages
This item sets the display mode for Option ROM.
Options: Force BIOS (Default) / Keep Current