Biostar H61M U3 - RAS# Active Time (tRAS); Write Recovery Time (tWR); Row Refresh Cycle Time (tRFC); Write to Read Delay (tWTR)

TH61MU3/H61MU3/H61MH/H61ML
UEFI BIOS Manual
30
RAS# Active Time (tRAS)
This item allows you to select Row Active Time of DDR3.
Options: 24 (Default) / 9 ~ 63
Write Recovery Time (tWR)
This item allows you to select Internal Write to Read Command Delay of DDR3.
Options: 10 (Default) / 3 ~ 31
Row Refresh Cycle Time (tRFC)
This item allows you to select Minimum Refresh Recovery Time of DDR3.
Options: 74 (Default) / 15 ~ 255
Write to Read Delay (tWTR)
This item allows you to select Internal Write to Read Command Delay of DDR3.
Options: 5 (Default) / 3 ~ 31
Active to Active Delay (tRRD)
This item allows you to select Row Active to Row Active Delay of DDR3.
Options: 4 (Default) / 4 ~ 15
Read CAS# Precharge (tRTP)
This item allows you to select Read to Precharge Delay of DDR3.
Options: 5 (Default) / 4 ~ 15
Four Active Window Delay (tFAW)
This item allows you to select Four Active Window Delay of DDR3.
Options: 20 (Default) / 4 ~ 63
CPU Request VCore
This item sets CPU Request Voltage.