TH61MU3/H61MU3/H61MH/H61ML
UEFI BIOS Manual
29
CPU C1 E
C1E is “Enhanced Halt State” function, this function helps to save power and
decrease heat by lowering CPU frequency while the processor is not working.
Options: Enabled (Default) / Disabled
Graph ic s Core Ratio Lim it
This item sets Graphics Core Ratio Limit.
Options: 30 (Default)
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Options: Auto (Default) / 10.67 / 13.33
DRAM Timing Control
This item allows you to choose to manually or automatically regulate the DRAM
Timing.
Options: By SPD (Default) / Manual
DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Options: 9 (Default) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Options: 9 (Default) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of DDR3.
Options: 9 (Default) / 3 ~ 15
To Next Page
Loading...
Need help?
General
