Biostar P4M890-M7 TE User Manual

P4M900-M7 SE/P4M890-M7 TE
2
PCI Bus Support
This PHOENIX-AWARD BIOS also supports Version 3.0 of the Intel PCI
(Peripheral Component Interconnect) local bus specification.
DRAM Support
DDR2 SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This PHOENIX-AWARD BIOS supports the Intel CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to
select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help
and press <Esc> to quit. The following table provides more detail about how to
navigate in the Setup program by using the keyboard.
Keystroke Function
Up arrow
Move to previous item
Down arrow
Move to next item
Left arrow
Move to the item on the left (menu bar)
Right arrow
Move to the item on the right (menu bar)
Move Enter
Move to the item you desired
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ Key Increase the numeric value or make changes
- Key
Decrease the numeric value or make changes
Esc key
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
F1 key
General help on Setup navigation keys
F5 key
Load previous values from CMOS
F7 key Load the optimized defaults
F10 key Save all the CMOS changes and exit

Biostar P4M890-M7 TE Specifications

General

Brand	Biostar
Model	P4M890-M7 TE
Category	Motherboard
Language	English