Biostar TZ77B - Enhanced Intel Speedstep Technology; Cpu Ratio; Cpu Spread Spectrum

TZ77B/TZ75B/T77 UEFI BIOS Manual
32
CPU Ratio
This item allows you to set the CPU ratio. This item is adjustable only when Fixed
CPU Ratio is set to Enabled.
Options: 30 (Default) / 10 ~ 50
Host Clock Override (1/100 MHz)
This item sets Host Cloc k Override.
Options: 10000 (Default)
CPU Spread Spectrum
This item sets CPU Clock Spread Spectrum.
Options: Enab led (Default) / Disabled
CPU C1E
C1E is “Enhanced Halt State” function, this function helps to save power and
decrease heat by lo wering CPU frequency while the processor is not working.
Options: Enab led (Default) / Disabled
Enhanced Intel SpeedStep Technology
This item enables /d isables Enhanced Intel SpeedStep Technology.
Options: Enabled (Default) / Disabled
CPU Core Current Max (Amp)
This item sets the Max instantaneous current allowed at any given time.
Options: 150 (Default)
Power Limit 1 Value (Watt)
This item sets the power limit value which CPU must not exceed over a specific
time.
Options: 160 (Default)
Power Limit 2 Value (Watt)
This item sets the power limit value which CPU must not exceed over a specific
time.
Options: 180 (Default)