Biostar TZ77B - DDR3 Memory Timing and Voltage

TZ77B/TZ75B/T77 UEFI BIOS Manual
33
CPU Turbo Mode
This item enables/disables CPU Turbo Mode.
Options: Disabled (Default) / Enabled
iGFX Core Current Max (Amp)
This item sets iGFX Core Current Max.
Options: 35 (Default)
Graphics Core Ratio Limit
This item sets Graphics Core Ratio Limit.
Options: 20 (Default)
DDR3 DRAM Timing Control
This item allows you to choose to manually or automatically regulate the DRAM Timing.
Options: By SPD (Default) / Manual
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Options: 13.33 (Default) / 10.67 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28
DDR3 DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Options: 9 (Default) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Options: 9 (Default) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of DDR3.
Options: 9 (Default) / 3 ~ 15