OPERATION
• NEVER Place Hands into Machine Input or Output Openings.
• ONLY Properly Trained Personnel Should Use This Equipment.
7
• NEVER Open Machine During Operation.
• NEVER Operate Machine With Product Mixer Safety Cover Opened or Hopper Removed or Magnetic
Interlock Switch By-Passed.
• ALWAYS Turn Off and Unplug Machine from Power Source and Perform Lockout/Tagout
Procedure to This Machine BEFORE Unjamming, Unclogging, Cleaning or Servicing or When Not in Use.
• NEVER Operate Without All Warning Labels Attached and Owner/Operator Manual Available to
the Operator.
• DO NOT Wear Gloves While Operating.
• DO NOT Tamper With, Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.
• NEVER Leave Machine Unattended While the Grinder is Running.
A. TO PROCESS PRODUCT
1. Before starting the mixer grinder, have a container for receiving ground product at the output end of the
grinding bowl.
2. FIRST GRIND
3. SECOND GRIND
4. Unplug machine from power source and perform lockout/tagout procedures.
a. Fill Product Hopper (Maximum 60 Pounds), and close Product Mixer Safety Cover.
b. With the Auger Engage Lever disengaged, in the “Mix” postion and the selector switch in hand postion,
push the green start button. During this mix operation, seasonings may be added through the sight holes
in the Product Mixer Safety Cover.
c. After the desired mix, engage the Auger Engage Lever by moving it into the “Grind” position to operate
the grinding auger and grind out the product.
b. Push the green start button with the selector switch in hand position and engage the Auger Engage
Lever by moving it to the “Grind” position to feed rst grind. It is recommended to use a breaker plate
with a ⅜” diameter or larger holes.
c. Push the red stop button and disengage the Auger by moving the Auger Engage Lever to the “Mix”
position when all product has been ground out.
a. Fill Product Hopper (Maximum 60 Pounds), and close Product Mixer Safety Cover.
d. Push the red stop button and disengage the grinder by moving the Auger Engage Lever to “Mix” when
all product has been ground out.
ROTATING GRINDING AUGER & ROTATING MIXING PADDLE
TO AVOID SERIOUS PERSONAL INJURY
To Next Page
Loading...
