BIS TRADITION User Manual

Installation and Operating
Instructions
This installation manual will help you obtain a
safe, efficient, dependable installation for your
fireplace and chimney system. Please read and
understand these installation instructions
before beginning the installation or operating
the fireplace.
CAUTION: Do not attempt to modify or
alter the construction of the fireplace or its
components. Any modification or alteration of
construction may void the warranty, listings
and approvals of this system. In that case,
Security Chimneys International Ltd will not
be responsible for damages. Install the fireplace
only as described in these instructions.
PLEASE RETAIN THIS MANUAL FOR
FUTURE REFERENCE
WARNING: This fireplace cannot be
operated without doors. Consult your dealer
to select the correct door model of your choice.
2125 rue Monterey, Laval, Québec, Canada, H7L 3T6
• Hot! Do not touch! The glass
and surfaces of this appliance
will be hot during operation and
will retain heat for a while after
shutting off the appliance. Severe
burn may result.
• Carefully supervise children in
the same room as appliance.
• If small children are present in the home, it
is recommended that this appliance be used
with a fire screen kit.
Listed to standards:
ULC-S610, UL-127
Report # 3047213

BIS TRADITION Specifications

General

Brand	BIS
Model	TRADITION
Category	Indoor Fireplace
Language	English

Summary

General Warnings and Precautions

25 Year Limited Warranty

Warranty Coverage Details

Details parts and labor coverage for different warranty periods (Year 1, Years 2-5, Years 6-25).

Warranty Exclusions and Conditions

Lists parts, conditions, and limitations not covered by the fireplace warranty.

Operating Safety Rules

Certification Label

The Fireplace

3.1 Introduction to the Fireplace

Provides an overview of the BIS TRADITION fireplace and its installation process.

3.2 Operating the BIS TRADITION

Details how to operate the BIS TRADITION fireplace for optimal performance and heat output.

Maintaining Your BIS TRADITION

3.3.1 Creosote and Chimney Maintenance

Managing creosote buildup and performing regular chimney inspection and cleaning.

3.3.3 Chimney Fire Response

Provides step-by-step instructions for handling and responding to a chimney fire.

3.3.4-3.3.11 Component Care and Replacement

Covers care and replacement for doors, glass, gaskets, refractory bricks, and ashes.

Fireplace Installation Guidelines

3.4.1 Locating the Fireplace

Guidance on selecting the best location for the BIS TRADITION fireplace considering various factors.

3.4.2 Hearth Extension Requirements

Specifies requirements for the non-combustible hearth extension in front of the fireplace.

3.4.3 Framing, Facing, and Mantel

Instructions for framing, facing materials, and mantel installation around the fireplace.

3.4.4 Fireplace Blower Installation

Details on installing and servicing the heat-activated fireplace blower.

Hot Air Ducting and Outside Air Installation

3.5 Hot Air Ducting Installation

Information on installing gravity and forced air kits for heat distribution.

3.6 Outside Air Connection

Mandatory requirements for connecting outside air to the fireplace for combustion.

Chimney Installation and Support

4.1 Chimney Installation Notes

Key considerations for optimal chimney performance and safe installation.

4.2 Chimney Installation Instructions

Step-by-step guide for installing various chimney models and components.

4.3 Offset Chimney Installation

Procedures for installing chimney sections with offsets or elbows, including height requirements.

4.5 Chimney Support Installation

Guidelines for supporting chimney sections at various heights and locations for stability.