EasyManua.ls Logo

BIS Ultima User Manual

BIS Ultima
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and Operating
Instructions
This installation manual will help you
obtain a safe, efficient, dependable
installation for your fireplace and
chimney system. Please read and
understand these installation instructions
before beginning your installation.
CAUTION: Do not attempt to modify or
alter the construction of the fireplace or
its components. Any modification or
alteration of construction may void the
warranty, listings and approvals of this
system. In that case, Security Chimneys
International Ltd will not be responsible
for damages. Install the fireplace only as
described in these instructions.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: The fireplace cannot be
operated without a door. Consult your
dealer to select the correct door model of
your choice.
This fireplace is also certified for use in
mobile or manufactured homes
2125 Monterey St., Laval, Quebec, Canada, H7L 3T6
Printed in Canada Rev. 12 December 2009 PIBISULTIMA
Hot! Do not touch! The glass
and surfaces of this appliance
will be hot during operation and
will retain heat for a while after
shutting off the appliance.
Severe burn may result.
Carefully supervise children in
the same room as appliance.
If small children are present in the home, it
is recommended that this appliance be used
with a Firescreen kit.
Listed to standards:
ULC-S610 UL-127
Report # 3011202
Question and Answer IconNeed help?

Do you have a question about the BIS Ultima and is the answer not in the manual?

BIS Ultima Specifications

General IconGeneral
Fuel TypeWood
EPA CertifiedYes
Remote ControlNo
ThermostatNo
TimerNo
ColorBlack
MaterialSteel
ModelUltima
Heating Area1500 sq.ft.
Flame EffectNatural Wood Burning Flame

Summary

Safety Rules and Certification

General Operating Safety

Essential safety rules for operating the BIS ULTIMA fireplace.

Certification and Installation Requirements

Details on certification labels, clearances, and installation prerequisites.

The BIS ULTIMA Fireplace: Operation and Maintenance

Fireplace Introduction and Components

Overview of the fireplace, its parts, and optional equipment.

Operating the Fireplace

Comprehensive guide on fuel, starting fires, air controls, and combustion modes.

Maintenance and Upkeep Procedures

Instructions for creosote management, chimney cleaning, and dealing with chimney fires.

Glass, Door, and Refractory Care

Procedures for maintaining glass, doors, refractories, and gaskets.

Fireplace Installation

Location Selection and Clearances

Factors for choosing a location and necessary clearances.

Hearth Extension and Framing

Requirements for hearth extensions and framing around the fireplace.

Hot Air Ducting and Outside Air Kit Installation

Installation of hot air ducting systems and the outside air kit.

The Chimney System Installation

Chimney Installation Basics and Notes

Important notes, height, clearances, and standard installation steps for the chimney.

Offset, Angled Wall, and Support Installations

Procedures for installing offsets, angled wall shields, and chimney supports.

Chimney Adaptors and Masonry Connection

Instructions for connecting different chimney types and to masonry chimneys.

Parts, Options, and Appendix

Parts and Components List

List of available parts and components for the fireplace and chimney.

Available Options and Specifications

Details on optional accessories, product specs, and clearances.

Replacement Parts Identification

List of common replacement parts for the fireplace and its components.

Related product manuals