ii
TABLE OF CONTENTS
Page
1. SAFETY RULES
and Specifications for Mobile or Manufactured Home Installation
... 1
2. CERTIFICATION LABEL ................................................................................ 2
3. THE FIREPLACE ............................................................................................... 3
3.1 INTRODUCTION .................................................................................................................. 3
3.1.1 Parts Required
3.1.2 Additional Equipment (optional)
3.2 OPERATING THE BIS ULTIMA™ .................................................................................... 4
3.2.1 Fuel
3.2.2 First Fires
3.2.3 Building a Fire
3.2.4 Primary Air and Air Boost Controls
3.2.5 Accelerated Combustion
3.2.6 Medium Combustion
3.2.7 Slow Combustion
3.2.8 Refuelling For Best Performance
3.2.9 Smoking – Causes And Troubleshooting
3.3 MAINTAINING YOUR BIS ULTIMA ................................................................................. 8
3.3.1 Creosote
3.3.2 Chimney Maintenance
3.3.3 Top Baffle Removal Prior to Cleaning The Chimney
3.3.4 Dealing With a Chimney Fire
3.3.5 Finish Door Casing Care
3.3.6 Ashes
3.3.7 Refractory Installation
3.3.8 Door Installation
3.3.9 Door Adjustment
3.3.10 Glass Care – Replacement
3.3.11 Glass Care – Cleaning
3.3.12 Gasket Replacement
3.4 FIREPLACE INSTALLATION ............................................................................................ 12
3.4.1 Locating The BIS ULTIMA
3.4.2 Hearth Extension Requirements
3.4.3 Framing, Facing And Mantel
3.5 HOT AIR DUCTING INSTALLATION .............................................................................. 17
3.5.1 Gravity Kit
3.5.2 Central Forced Air Kit
3.6 OUTSIDE AIR KIT ............................................................................................................... 21
3.6.1 Outside Air Kit Installation
4. THE CHIMNEY .................................................................................................... 22
4.1 CHIMNEY INSTALLATION NOTES ................................................................................. 22
4.2 CHIMNEY INSTALLATION INSTRUCTIONS ................................................................. 23
4.3 OFFSET CHIMNEY INSTALLATION .............................................................................. 26
4.4 ANGLED WALL RADIATION SHIELD ............................................................................ 29
4.5 CHIMNEY SUPPORTS INSTALLATION .......................................................................... 30
4.6 MULTIPLE TERMINATIONS ............................................................................................ 30
4.7 CHIMNEY ADAPTOR (S-2100+ / HT6000+) ...................................................................... 31
4.8 INSTALLATION INSTRUCTIONS FOR MASONRY APPLICATION ............................ 32
5. PARTS AND COMPONENTS LIST ................................................................. 33
6. OPTIONS ............................................................................................................. 34
7. APPENDIX (Specifications, Clearances, Replacement Parts) ......................... 34