19
Facing
Note: The facade must be removable once installed. The facade is
designed to overlap any facing material installed on the front of the
fireplace. If thicker material is installed, use the facade as a
template and make sure it can be easily removed for servicing.
1. Combustible material must be installed flush with the fireplace. It may not project in
front of and on the fireplace (i.e. the steel facade of the fireplace) (figure 15).
2. Non-combustible materials such as brick, stone or ceramic tile may project in front of
and onto the fireplace facing (figure 14).
1. Fireplace
2. Front of fireplace
3. Wood frame (2” x 3” min)
4. Drywall
5. Tiles
6. Rock board or other
7. Brick
Mantel
The mantel must be installed at least 56" (1442 mm) above the base of the fireplace (figure
13).
To Next Page
Loading...
