Chapter One ASurvey on Power tiller
Ⅰ. Main Technical Parameter
II General View
Chapter Two Main Applications of Power tiller
Ⅰ. Cultivating
Ⅱ Ditching & Ridging .
Ⅲ Short Distance Transport
Ⅳ Multi-Functional Working
Chapter Three Operation & Use Method of Power tiller
Ⅰ
. Assembly After Unpacking (see Figure 4)
Ⅱ. Installation and Adjustment for cable
Ⅲ Check and Refueling 1
Ⅳ. Starting
Ⅴ. Operation (Note: breaking-in must be performed before the use of power tiller, see the breaking-in
method in chapter Four)
Ⅵ. Connection use of Auxiliary Devices & Tools
Ⅶ. Training
Ⅷ. Preparation
Ⅸ. Operation
Ⅹ. Matters Need Attention During The Use of power tiller
Ⅺ. Safety Considerations
Chapter Four Maintenance & Service Method of power tiller
Ⅰ. Breaking-in
Ⅱ Maintenance and storage.
Ⅲ Technical Service of Power Tiller
Ⅳ Technical Service List of Power tiller
Ⅴ Long-Term Storage of Power tiller
Debugging Method of Power tiller
Ⅰ. Debugging Method of Mesh of Bevel Gear .
Ⅱ. Debugging Method of Reversing Gears and Cables
Ⅲ Debugging Method of Clutch Cables
Ⅳ. Debugging Method of Accelerator Cables
Ⅴ.Use & Debugging Method of Handle bar Frame
Chapter Six Troubleshooting of Power Tiller
Ⅰ. Troubleshooting of Diesel Engine
Ⅱ. Troubleshooting of Clutch
Ⅲ. Troubleshooting of Gear-box
Ⅳ. Troubleshooting of Traveling Mechanism
Ⅴ Other Troubleshooting
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
To Next Page
Loading...