Bissell CROSSWAVE HF2 User Manual

Product Overview
1. Handle
2. Power Button
3. Clean-Out Cycle Button
4. Clean Water Tank
5. Dirty Water Tank
Removal Button
Important Safety Instructions ................................ 2
What’s in the Box? ......................................................... 3
Assembly .............................................................................. 3
Filling the Clean Water Tank....................................4
Cleaning Your Floors .................................................... 5
Emptying the Dirty Water Tank ............................6
Using the Clean-Out Cycle ....................................... 7
After-Cleaning Care ...................................................... 8
Changing the Brush Roll ............................................9
Storing Your Machine ...................................................9
Troubleshooting ............................................................. 10
Limited Warranty ............................................................ 11
1
2
3
8
7
6
5
4
CROSSWAVE® HF2
WET & VACUUM HARD FLOOR CLEANER
3847 SERIES
6. Dirty Water Tank
with Filter
7. Brush Roll Window
Release Button
8. Brush Roll Window

Bissell CROSSWAVE HF2 Specifications

General

Brand	Bissell
Model	CROSSWAVE HF2
Category	Vacuum Cleaner
Language	English

Summary

Important Safety Instructions

Filling the Clean Water Tank

Choose Cleaning Solution

Select a BISSELL Crosswave cleaning solution compatible with your machine.

Fill with Water and Solution

Fill the clean water tank with warm water to the fill line and add the specified amount of cleaning solution.

Reattach Clean Water Tank

Cleaning Your Floors

Prepare for Cleaning

Unwrap the cord, plug in the machine, and recline the handle to start cleaning.

Activate Machine and Clean

Press the power button, allow brush roll to wet, and use steady strokes for best performance.

Emptying the Dirty Water Tank

Empty Tank When Full

Empty the dirty water tank when it reaches the 'MAX' line to prevent overfilling.

Remove and Rinse Tank

Reinstall Dirty Water Tank

Using the Clean-Out Cycle

Prepare for Clean-Out

Run Clean-Out Cycle

Troubleshooting