To Next Page
A
Alan BarnesJul 28, 2025
Why does my Bissell CROSSWAVE PET have loss of suction power?
- JJose AlexanderJul 29, 2025
A loss of suction power in your Bissell Vacuum Cleaner can occur for several reasons. The tanks may not be seated properly, so ensure that you turn the power OFF, remove both tanks, and reseat them correctly. Also, the dirty water tank might be full; empty it and make sure to make slow cleaning passes back and forth while cleaning. Check if the brush window is not latched in place, turn the power OFF, unplug the machine, and reinstall the brush window. Additionally, the debris channel in the foot could be clogged, so clean it with a paper towel. Lastly, the filter might be clogged by debris; remove any debris clogging the filter screen and clean the filter.
General
