Bissell CROSSWAVE X7 Using

CrossWave X7 using the 3-in-1
Docking Station & Clean out Cycle |
Support
The 3-in-1 Docking Station functions as a clean out tray, charging
station, and storage tray for machine, brush rolls, and filter
Clean Out Cycle:
• Plug in the docking station
• Place machine on docking station
• Fill clean water tank with warm tap water and formula to the
clean out cycle icon on the tank
o Put clean water tank back on machine
• Press clean out cycle button and let machine go through full
40 second cycle

Bissell CROSSWAVE X7 Specifications

General

Cordless	Yes
Battery Type	Lithium-Ion
Run Time	Up to 30 minutes
Multi-Surface Cleaning	Yes
LED Headlights	Yes
Charge Time	4 hours
Features	Multi-surface cleaning, LED headlights, Self-cleaning cycle
Power Source	Battery
Cord Length	N/A (Cordless)
Surface Recommendation	Hard Floors, Area Rugs
Included Accessories	Multi-Surface Brush Roll
Type	Wet-Dry Vacuum