BIXOLON SRP-270 Software Manual

Virtual COM for Ethernet Driver / Configuration Tool
Rev. 2.02
- 6 -
3-2 Deletion
1) Click and activate the “Add/Remove Programs” icon in the Control Panel.
2) Select “Virtual Com for Ethernet Driver 1.x.x” and click the
“Change/Remove“ button.
3) Click the “OK” button to completely remove the application.

BIXOLON SRP-270 Specifications

General

Color	No
Maximum print size	-
Media thickness	76 mm
Print technology	Dot matrix
Power requirements	120-230VAC
Standard interfaces	Parallel, Serial