BIXOLON SRP-275II Windows Driver Manual

SRP-275II
Rev. 1.05
- 23 -
5-1-3 Copies
Copies are printed by specifying the copy count. The copy count is set to 1 by default. Set
this value bigger than 1 to set the number of copies to print. The value should be within the
range of 1 to 255.
5-1-4 Color
The printer can print by using black and red, or by using black only. Select Monochrome if
you want to use black color only.
5-1-5 Orientation
Printing orientation can be set to Portrait (which is the default) or Landscape. It is not
possible to use printer fonts (device fonts) in landscape.
Portrait : Printing in the vertical direction.
Landscape : Printing in the horizontal direction.

BIXOLON SRP-275II Specifications

General

Type	POS printer
Print speed	5.1 lps
Maximum resolution	80 x 144 DPI
Maximum roll diameter	85 mm
Supported paper width	76.5 mm
Maximum printing width	63.5 mm
Flash memory	2 MB
RAM capacity	0.008 GB
Autocutter durability	1.5 million cuts
Built-in sensors details	Paper End, Paper Near End, Wall Mounting Paper Near End, Rear Cover Open, Black Mark
AC input voltage	100-240 V
Power source type	DC
AC input frequency	50 - 60 Hz
Mean cycles between failures (MCBF)	18000000
Product color	Black
USB port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Parallel ports quantity	1
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	239 mm
Width	160 mm
Height	157 mm
Weight	2400 g