- Only use a power supply provided by Bixolon. Bixolon shall
bear noresponsibility for damage caused by using a third-party
power supply.
- Check the power supply’s label to check its electronic specs.
- When removing the power supply, make sure you have a firm
grasp of the plug terminal of the power cable and the printer
and pull horizontally.
- When connecting or disconnecting power, make sure to remove
the power supply from the power outlet before removing.
- Pay attention to the direction in which you insert the power
cable.
- SRP-E300/E302
- SRP-E300ES/302ES
Do not connect a voltage out of the specifications of the power
supply. It can cause damage to the product or a fire.
To Next Page
Loading...
