BIXOLON SRP-E300ESK - Specifications

Ver. 1.00
- 21 -
SRP-E300/E302
4. Specifications
Printing Method
Thermal printing
Dot Density
SRP-E300/E300ES: 180 dpi (7dots/mm)
SRP-E302/E302ES: 203 dpi (8dots/mm)
Printing Width
3 inches
72 mm
Roll Width
3 inches
79.5±0.5 mm
No. of Characters per Line
(Default Value)
SRP-E300/E300ES:
42 (Font A) ,56 (Font B), 56 (Font C)
SRP-E302/E302ES:
48 (Font A) ,64 (Font B), 64 (Font C)
Printing Speed
Max. 220 mm/sec
Receiving Buffer Size
4K bytes
Interface
SRP-E300/E302: USB
SRP-E300ES/E302ES: USB, Ethernet, Serial
Cash Drawer
2ports with Y-type cable
Supply Voltage
SMPS
Input Voltage
100~240 VAC
Frequency
50/60 Hz
SMPS
Output Voltage
24 VDC
Environment
Condition
Temperature
Operating: 0 ~ 40 ℃
Storage: -20 ~ 60 ℃
Humidity
Operating: 10 ~ 80 % RH
Storage: 10 ~ 90 % RH
Paper excluded
Life Span
Printer Head *)
150 Km
Auto Cutter
1,500,000 cuts
*) The specifications were determined based on operation at normal temperature using
designated paper on default settings. They are subject to change depending on
temperature or printing level.
Caution
Printing speed may become slightly slower depending on
the data transmission speed and the combination of commands.