BIXOLON SRP-S300 - Using Controller

SRP-S300
Ver. 2.00
- 26 -
3-4 Using Controller
Explanation
POWER LED
The Power LED light is on whenever the printer is on.
ERROR LED
Error LED is on when there is an error such as no paper roll, open
cover, etc.
PAPER LED
Paper LED is on when the paper roll is almost used up or there is no
paper roll inside. Paper LED flickers when the machine is in a
self-diagnosis stand-by or macro execution stand-by state.
FEED Button
Press the Feed button once to output one line of the paper roll.
Press the Feed button for more than 3 seconds to output the paper
roll continuously.