BIXOLON SRP-S300 - Specifications; Printer Specifications

SRP-S300
Ver. 2.00
- 41 -
8. Specifications
8-1 Printer Specifications
Printing Method
Thermal Line Printing
Dot Density
203 dpi (8 dots/mm)
Paper Width / Printing Width
83mm
80mm or 72mm
80mm
72mm
62mm
60mm
58mm
48mm
40mm
32mm
Paper Width
79.5 ±0.5mm, 61.5 ±0.5mm,
57.5 ±0.5mm, 39.5 ±0.5mm,
82.5 +1, -0.5mm
Characters Per Line (Default)
48(Font A), 64(Font B), 64(Font C)
※ For 80mm Roll Paper
Printing Speed
Sticky, Re-stick, Linerless Extreme:
Max. 170mm/sec
Receipt: Max. 300mm/sec
Receive Buffer Size
4Kbytes
AC/DC Adapter
Supply Voltage
Input Voltage
100~240 VAC
Frequency
50/60 Hz
Output Voltage
+24 VDC/2.5A
Environmental
Conditions
Temperature
0 ~ 40 ℃(Operating)
-20 ~ 60 ℃(Storage)
Humidity
10 ~ 80 % RH(Operating)
10 ~ 90 % RH(Storage)
; Excluding papers
Life Span
Printer Head
Sticky, Re-stick, Linerless Extreme: 75km
Receipt: 150km
Auto Cutter
Sticky, Re-stick: 1,000,000 cuts
Receipt: 3,000,000 cuts
The specifications were determined based on operation at normal
temperature using designated paper on default settings.
They are subject to change depending on temperature or printing level.
Printing speed may become slightly slower depending on
the data transmission speed and the combination of commands.