BIXOLON STP-103 - Chapter 8: Printer Functions; Printer Command Overview

26 27
Chapter 8. Functions
The commands listed in the table below are available for control of the printer.
Commands
Command Classification
Command Name
Execution Setting
Standard
Mode
HT Horizontal tab ○ ○
LF Print and line feed ○ ○
CR Print and carriage return ○ ○
DLE EOT Real-tine status transmission ○ ○
DLE ENQ Real-time request to printer ○ ○
ESC SP Set right-side character spacing ○ ○
ESC ! Select print mode(s) ○ ○
ESC $ Set absolute print position ○ ○
ESC % Select/cancel user-defined character set ○ ○
ESC & Define user-defined characters ○ ○
ESC * Select bit-image mode ○ ○
ESC - Turn underline mode on/off ○ ○
ESC 2 Select 1/6-inch line spacing ○ ○
ESC 3 Set line spacing ○ ○
ESC = Select peripheral device ○ ○
ESC ? Cancel user-defined characters ○ ○
ESC @ Initialize printer ○ ○ ○
ESC D Set horizontal tab positions ○ ○
ESC E Turn emphasized mode on/off ○ ○
ESC J Print and feed paper ○ ○
ESC R Select an international character set ○ ○
ESC V Turn 90 clockwise rotation mode on/off ○ ○
ESC ＼
Set relative print position ○ ○
ESC a Select justification ○