1. PRODUCT DESCRIPTION
1-1. Introduction
Thank you for purchasing our product. Electronic measuring instruments produced
by us are high technology products made under strict quality control. We guarantee
their exceptional precision and utmost reliability. For proper use of the product,
please read this operation manual carefully.
Note
1. To fully maintain the precision and reliability of the product use it within the range
of standard setting (Temperature 10 °C~35 °C, Humidity 45%~85%)
2. After turning of power, please allow a pre-heating period of as long as some 30
minutes before use.
3. This equipment should be used with a triple line power cord for safety.
4. For quality improvement the exterior design and specification of the product can
be changed without prior notice.
5. If you have further questions concerning use, please contact our service center or
sales outlet.
This Digital multimeter is a portable, bench type Digital multimeter with a 4 1/2 digit
light-emitting diode. This Digital multimeter can make diode measurements,
Frequency measurements & continuity test, in addition to Current, Voltage and
Resistance measurements.
n Features
• Bench type True RMS Digital Multimeter with 4 1/2 digit (LED)display.
• Basic accuracy for DCV ; 0.05 %
• Overload protection on all range
• AC/DC Voltage measurement(Up to DC 1200V, AC 1000V)
• AC/DC Current measurement(Up to 20A)
• Resistance measurement(Up to 20Mohm)
• Frequency Measurement(Up to 200kHz)
• Audible continuity test
To Next Page
Loading...
Need help?
General
