103 ∼ 126V AC (50/60Hz) F 0.5A / 250V
206 ∼ 252V AC (50/60Hz) F 0.2A / 250V
10 W
l Operating Environment:
Temperature : 0°C to + 40 °C (Accuracy Specified at 23 °C ± 5 °C)
Temperature Coefficient : 0.1x( Specified Accuracy) per°C
HUMIDITY: up to 85% RH (Relative Humidity) to 40°C without temperature
extremes causing condensation within the instrument.
l Storage Environment:
TEMPERATURE: -20°C to +70°C HUMIDITY: below 85% RH
l Insulation Category II: Portable equipment of local level.
l Pollution Degree: 2
l Protection to IEC 529: Ordinary
Note: Specifications are subject to change without notice.
1-4. Supplied Accessories
l User’s Manual ----------------------------------------------------- 1
l Test Leads---------------------------------------------------------- 1
l Power cord---------------------------------------------------------- 1
l Spare Fuse--------------------------------------------------------- 1
1-5. International electrical symbol
SAFETY RULES
l
Remember: THINK SAFETY AND ACT SAFELY.
l
Read these operating instructions thoroughly and completely before operating
this meter.
l
Pay particular attention to WARNINGS used for conditions and actions that
pose hazard to the user and CAUTIONS used for conditions and actions that
may damage the meter.
l
Always to inspect this meter, test probes and accessories for any sign of
damage or abnormality before every use.
l
Never ground yourself and keep your body isolated from ground.
l
Never touch exposed wiring, connections or any live circuit conductors.
l
Disconnect the live test probe before disconnecting the common test probe.
l
Use caution when working above 60V DC or 25V AC rms. Such voltages pose a
shock hazard.
SAFETY SYMBOLS
To Next Page
Loading...
Need help?
General
