Need help?Do you have a question about the BK Precision 878A and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Max DC Voltage Measurement | 1000 V |
| Max AC Voltage Measurement | 750 V |
| Max DC Current Measurement | 10 A |
| Max AC Current Measurement | 10 A |
| Frequency Range | 0.1 Hz to 10 MHz |
| Temperature Measurement | -40°C to 1000°C |
| Battery Type | 9V |
| Continuity | Yes |
| Diode Test | Yes |
| True RMS | Yes |
| Backlight | Yes |
| Data Logging | No |
| Interface | USB |
| Resistance Range | 50 MΩ |
| Operating Temperature | 0°C to 50°C |
Allows the operator to freeze the display.
Calibrates meter's internal parameters and connector residues for accurate measurements.
Detailed accuracy specifications for resistance measurements in parallel mode.
Detailed accuracy specifications for capacitance measurements in parallel mode.
Detailed accuracy specifications for inductance measurements in series mode.
Procedure for replacing the meter's 9V battery.
Procedure for replacing the meter's protective fuse.
To Next Page
