INTRODUCTION
This 19,999-count L/C/R hand-held meter is a special microprocessor-
controlled meter for measuring functions of inductance, capacitance and
resistance. Extremely simple to operate, the instrument not only takes
absolute parallel mode measurements, but also capable of series mode
measurement. The meter provides direct and accurate measurements of
inductors, capacitors and resistors with different testing frequencies. It is
selectable for auto and manual ranging.
Front panel pushbuttons maximize the convenience of function and
feature selection such as data hold; maximum, minimum and average
record mode; relative mode; tolerance sorting mode; frequency and
L/C/R selection.
The test data can be transferred to PC through an optional full isolated
optical RS232C interface.
Backlight display for easy reading in dark places (Model-A only).
A tilt stand provides position flexibility for viewing and operating the
meter. The over-molding rubber case protects the meter to be stronger.
With single 9V battery operation is standard for the meter, a DC 12V
power adaptor can also be used as an optional power input.
To Next Page
Loading...
Need help?
General
