HOW TO OPERATE
Caution
•
When measuring within a circuit, the circuit must be de-
energized before connecting the test leads.
•
The instrument that used in dusty environment should be
wiped and cleaned regularly.
•
Do not leave the instrument exposed to direct heat from the
sun or beat source for long periods.
•
Before removing the cover, ensure that the instrument is
disconnected from any circuit and in power "OFF" position.
Note:
For achieving optimum precision for all L, C and R
measurements at either the highest or lowest ranges, it is
recommended to calibrate the meter before testing.
To Next Page
Loading...
