SAFETY INFORMATION
To ensure that you use this device safely, follow the safety guidelines
listed below:
•
This meter is for indoor use, altitude up to 2,000 m.
•
The warnings and precautions should be read and well
understood before the instrument is used.
•
Use this device only as specified in this manual; otherwise,
the protection provided by the meter may be impaired.
•
When measuring in-circuit components, first de-energize the
circuits before connecting to the test leads.
•
Discharge capacitor before testing.
•
The meter is safety-certified in compliance with EN61010
(IEC 1010-1) Installation Category II (CAT. II) 50 V,
Pollution Degree 2 environment.
•
Use the meter only as specified in this manual. Otherwise,
the protection provided by the meter may be impaired.
•
The power for the meter is supplied with a single standard
9V battery. But also a line operation is possible using a 12V
AC to DC adaptor. If a power adaptor is selected, please be
sure to use fulfilled the safety requirements of a relevant IEC
standard.
To Next Page
Loading...
