BK Precision 878A User Manual

22
Test Frequency: 10 KHz
Range
Maximum
Display
Accuracy
Spec. Note
Capacitance
DF
50μF 50.0μF 3.0%+8
(DF<0.1)
12%+100/Cx+10
(DF<0.1)
After short cal.
20μF 19.999μF 3.0%+6
(DF<0.2)
5.0%+100/Cx+8
(DF<0.2)
After short cal.
2000nF 1999.9nF 1.5%+5
(DF<0.5)
1.5%+100/Cx+6
(DF<0.5)
-
200nF 199.99nF 1.5%+5
(DF<0.5)
1.5%+100/Cx+6
(DF<0.5)
-
20nF 19.999nF 1.5%+5
(DF<0.5)
1.5%+100/Cx+6
(DF<0.5)
-
2000pF 1999.9pF 2.0%+6
(DF<0.5)
3.0%+100/Cx+6
(DF<0.5)
After open cal.
200pF 199.99pF 3.0%+8
(DF<0.1)
5.0%+100/Cx+8
(DF<0.1)
After open cal.
Notes:
1. Q Value is the reciprocal of DF.
2. This specification is based on the measurement performed at the test socket.
3. DUT & Test leads should be properly shielded to GUARD if necessary.
4. Cx=Counts of displayed C value, e.g. C=88.88μF then Cx=8888.
5. This reading can be extended to 1999 MAX display with accuracy not
specified.
6. This reading can be extended to 19999 MAX display with accuracy not
specified.

BK Precision 878A Specifications

General

Brand	BK Precision
Model	878A
Category	Multimeter
Language	English