17
button; meaning that function will be
set or configured upon pressing it. To
escape out of the functions, hold and
press the corresponding button for
two seconds.
Blue – Some of the buttons have a blue label
underneath a white label. This means
the function indicated by the blue
label will be set if that button is
pressed and held for 2 seconds.
Yellow – There are total of 6 buttons with
yellow labels. They are
. These functions are
exclusively for use when entering the
SET menu for configuring setup menu
items as well as compare function.
See “Setup Menu” and “Compare
Mode” sections respectively for
details.
To Next Page
Loading...
Need help?
General
