BK Precision 830C - Navigating the Setup Menu; Setup Menu Settings and Defaults Table

31
holding until “bAUd” is displayed on the
primary display. For details on configuring settings,
please see SETUP OPTIONS section. To exit setup
menu, press and hold for 2 seconds and the
meter will return to normal display.
SETUP OPTIONS
There are various system parameters that the meter
can be configured for when entering the setup menu
(see “Setup Menu” section for instructions on how to
access the menu). The below table lists these
parameters, as well as their factory default settings
and selectable parameters.
Table 1 - Setup Menu System Settings and Default
Menu
item
Factory
Setting
Selectable Parameters
bAUd 9600
Baud rate: 2400, 4800, 9600,
19200
PArt
NONE
Parity: odd, even, none
Data
8-b
Data bits: 8 bits or 7 bits (Stop bit