Need help?Do you have a question about the BK Precision 830C and is the answer not in the manual?
General| Brand | BK Precision |
|---|---|
| Model | 830C |
| Category | Measuring Instruments |
| Language | English |
Ensures safe operation in environments without flammable gases or fumes.
Emphasizes that only qualified personnel should access internal components.
Warns against using unauthorized parts or modifying the instrument.
Guidelines for safe operation including environmental limits and handling precautions.
Explains the color coding and primary functions of the front panel buttons.
Step-by-step instructions for installing a 9V battery into the meter.
Details on inserting the 9V battery with correct polarity into the compartment.
Steps for connecting the AC adapter, including battery polarity check and warnings.
Instructions on how to turn the LCD backlight on and off using the HI/LO button.
Procedure to reset high and low limit values to factory default settings using specific buttons.
Instructions to reset settings by pressing and holding the HOLD/SAVE button for two seconds.
Allows freezing the display to hold the measured value until data hold is turned off.
Instructions to insert a known 'good' component as the standard reference value.
Sets capacitance range, accepting parameters for units like pF, nF, μF, mF.
Enables or disables calculation functions like NULL, TOLerance, LIMit, AVERage, NONE.
Queries values for static dynamic recording functions (MAXimum, MINimum, AVERage, PRESent).
Sets the mode or value for the Limit function, including upper and lower limits.
Selects a source for the trigger signal: BUS (command) or IMMediate (internal).
Returns the primary display value from the output buffer, representing measurements taken.
Queries the error message, returning number and error string.
Queries the status of the meter, returning a 21-character status string.
Tip to disconnect power and discharge capacitors to avoid damage or hazards.
Discharge capacitor first and select suitable range for faster measurement of >1000μF.
Lists conditions like test socket use, shielding, warm-up time, and accuracy range.
Accuracy specifications for various capacitance ranges, given as % of reading + counts.
Warning not to perform service personally; use specified replacement parts and turn off meter.
Table guiding users to identify and resolve basic problems like no LCD indication or no beeper tone.
Instructions for obtaining warranty service, including RMA process and return address.
Instructions for non-warranty service, including payment methods and return shipping.
Excludes misuse, abuse, unauthorized alterations; limits liability for consequential damages.
To Next Page
