BK Precision 830C - CALCulate Tolerance Base Query; CALCulate Tolerance Value Query; CALCulate Tolerance State Command

88
CALCulate:TOLerance:RANGe command will
return an error on display.
CALCulate:TOLerance:BASE?
Description: Query the base value of the
tolerance function.
Response: Return <NR3> format string.
CALCulate:TOLerance:VALue?
Description: Query the tolerance value of the
tolerance function.
Response: Return <NR3> format string.
The returned value will not be in terms of %. For
example, if display shows 0.35%, return value
could be 3.535005e-03
CALCulate:TOLerance:STATe <Boolean>
Description: Enable or disable the tolerance
function of the calculation.
Example: CALC:TOL:STAT OFF