BK Precision 830C - CALCulate Null Offset Query; CALCulate Null State Command; CALCulate Average Subsystem

84
CALCulate:NULL:OFFSet?
Description: Query the offset value of the null
(relative) function.
Response: Return <NR3> format string.
Note: If relative function is disabled, querying the
offset of relative mode will return an error. Re-
enable in order to get a returned value. Use
CALCulate:NULL:STATe command shown below
to control the relative function.
CALCulate:NULL:STATe <Boolean>
Description: Enable or disable the null
(relative) function of the calculation.
Example: CALC:NULL:STAT OFF
CALCulate:AVERage
:MAXimun?
:MINimun?
:AVERage?
:PRESent?
Description: Query the value of the static
dynamic recording function.
Response: Return <NR3> format string.