55
Minimum Mode
In this mode, the “MIN” indicator will be displayed. This
indicates that the value in the primary display represents the
recorded minimum value.
Average Mode
In this mode, the “AVG” indicator will be displayed. This
indicates that the value in the primary display represents the
recorded average value. This average value is obtained by
taking the maximum and minimum recorded values and
taking the average of the two values.
Disable Static Recording
To exit this mode, press and hold the button for
two seconds. The “MAX AVG MIN”, “MAX”, “MIN”, or
“AVG” indicator will disappear on screen, and auto power off
will be re-enabled again if it was enabled prior to entering
static recording mode. “@OFF” indicator will come back on
when enabled.
To Next Page
Loading...
Need help?
General
