19
7. – Beep tone indicator for tolerance and
compare mode
8. % - Tolerance percentage indicator
9. kHz – Frequency units indicator
10. – Capacitance units (Farad) indicator
(Actual display will show pF, mF, or µF)
11. RMT – Remote mode indicator
12. – Primary display
13. – Low battery indicator
14. – Reading out of the LO limit
15. – Reading out of the HI limit
16. @OFF – Enable Auto Power off indicator
17. TOL 1%5%10%20% - Tolerance mode
percentage for sorting capacitance
To Next Page
Loading...
