25
starts flashing the indicator, the battery voltage
is below normal working voltage. In this case,
accuracy of the meter will also decrease. It is
recommended that the battery be replaced as soon as
possible before continuing operation. See “Installing
Battery” for instructions.
Backlit Display (model 879B only)
Model 879B LCR meter has a backlit display that
allows you to see the LCD display in dark conditions.
To turn on the back light, press and hold down
button for 2 seconds. Back light will turn on and
brighten the LCD display.
To turn off the back light at any time, press and hold
down button for 2 seconds again. Back light
will turn off and return to normal display.
When Using Battery Power
When the meter is powered using 9V battery, the back
light display will turn on upon holding down the
button for 2 seconds. It will stay at maximum
To Next Page
Loading...
Need help?
General
