BK Precision 9801 Programming Manual

Return parameters:<bool>
SYSTem:INTerface
This command is used to select the communication interfaces.
Command syntax：SYSTem:INTerface <string>
Parameter:< USB|RS232|LAN>
2.5 TRIGGER Subsystem
TRIGger[:IMMediate]
This command is used to create a trigger signal. It will give a trigger signal in BUS trigger source
mode. The function is the same as command *TRG.
Command syntax: TRIGger[:IMMediate]
Parameter: None
Related commands: *TRG
TRIGger:SOURce
This command is used to select the trigger source. Power supply can receive trigger signals
directly from front panel by pushing “Trigger” button or receive from a BUS trigger signal (usin
*TRG command).
Command syntax: TRIG:SOURce <string>
Parameters: MANUAL |BUS |EXTern
Query syntax: TRIGger:SOURce?
Return parameter: <string>
2.6 SOURCE Subsystem
[SOURce:]OUTPut[:STATe]
This command is used to control the output state of the power supply.
Command syntax: [SOURce:]OUTPut [:STATe] <bool>
Parameter: 0|1|ON|OFF
Query syntax: [SOURce:]OUTPut[:STATe]?
Return parameter: <bool>
[SOURce:]RANGe
This command is used to set the voltage and current ranges.
Command syntax: [SOURce:]RANGe <string>
Parameter: AUTO|HIGH
Query syntax: [SOURce:]RANGe?
Return parameter: <string>

BK Precision 9801 Specifications

General

Brand	BK Precision
Model	9801
Category	AC Power Distribution
Language	English