BK Precision 9801 - Getting Started and Basic Operation; Input Power, Fuses, and AC Connections

cache. After sending the command, the readings will be sent to the computer. This command
does not affect the instrument settings. This command does not trigger a measurement
operation, and queries only the latest available reading. Before reading the new reading, the
command returns the old readings.
Command syntax: FETCh:CURR:PEAK:MAX?
Return parameter: <NRf>
Return parameter unit: A
2.9 LIST Commands
LIST:STATe
This command is used to set the state of list mode.
Command syntax: LIST:STATe <string>
Parameter: < DISable|ENABle >
Query syntax: LIST:STATe?
Return parameter: <string>
LIST:RECall
This command is used to recall a list file.
Command syntax: LIST:RECall <NR1>
Parameter: 0 ~ 9
Example: LIST:REC 6
Query syntax: LIST:RECall?
Return parameter: <NR1>
LIST:STEP:COUNt
This command is used to set the number of steps in a list file.
Command syntax: LIST:STEP:COUNt <NR1>
Parameter: 1 ~ 100
Example: LIST:STEP:COUN 5
Query syntax: LIST:STEP:COUNt?
Return parameter: <NR1>
LIST:REPeat
This command is used to edit the number of repeat times of the list file.
Command syntax：LIST:REPeat <NR1>
Parameter: 1 ~ 10000
Example: LIST:REP 20
Query syntax: LIST:REPeat?
Return parameter: <NR1>