Black Box LPB3010A - Rear View of the Switch; LED Descriptions

5
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 1: OVERVIEW
1.3.2 BACK PANEL OF THE SWITCH
Figure 1-2 shows the back panel of the switch. Table 1-2 describes its components.
FIGURE 1-2. BACK PANEL SWITCH COMPONENTS
TABLE 1-2. BACK-PANEL SWITCH COMPONENTS
COMPONENT DESCRIPTION
(1) 3-prong power connector Links to 100 to 240 VAC power
1.3.3 LED DESCRIPTIONS
The LEDs on the front panel provide users with switch status checking and monitoring. There are three types of LEDs:
 System LED: Indicates if the switch is powered up correctly or not, or indicates if there is a system alarm triggered for troubleshooting.
 Mode LEDs: Indicates the mode of all ports on the switch. Users can press the Mode button sequentially to switch among the two
different modes (Link/Activity/Speed mode and PoE mode).
 Port Status LEDs: Indicates the current status of each port. Users can check these LEDs to understand the port status in different
modes, after changing the mode by pressing the Mode button.
The following table details the functions and descriptions of various LED indicators.