Black Stone 2379 - Page 39

BLACKSTONEPRODUCTS.COM
ESPAÑOL
| MANUAL DEL PROPIETARIOGUÍA DE MONTAJE
⚠ CAUTION
Heavy pieces. Two people should assemble this appliance.
Assembly time: 1~2 hoursAssembly time: 1~2 hours
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
⚠ CAUTION
Hot appliance. The cover/lid/hood MUST be open when the
appliance is in use.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
DO NOT place items on stabilizing shelf during use.
NOTICE
The paper towel holder arm must be in the open position
while the appliance is in use.
⚠ CAUTION
Heavy pieces. Two people should assemble this appliance.
Assembly time: 1~2 hoursAssembly time: 1~2 hours
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
⚠ CAUTION
Hot appliance. The cover/lid/hood MUST be open when the
appliance is in use.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
DO NOT place items on stabilizing shelf during use.
NOTICE
The paper towel holder arm must be in the open position
while the appliance is in use.
MODELO: 2379
PASO 06
Deslice el asiento del eje de la puerta (L) en el orificio
cuadrado superior.
Utilice un (1) tornillo M4x12 [e.] para fijar el asiento del eje de la puerta al frente
del horno.
PASO 09
Continúe con USANDO SU BLACKSTONE.
PASO 07
Deslice el eje de la puerta en el asiento (L).
Utilice un (1) tornillo M4x12 [e.] para fijar el asiento del eje de la puerta al frente
del horno.
OPCIÓN A: conecte el cable de
alimentación al motor.
OPCIÓN B: Inserte cuatro (4) baterías
AA en el motor.
(NO UTILICE las baterías y la fuente de
alimentación de CA al mismo tiempo).
PASO 08
Para alimentar el motor:
